Specifications include, but are not limited to: 1. The mobile metal weather-resistant container shall be an International Organization for Standardization (ISO) certified metal container equipped with two (2) 8’ wide roll up doors, interior lighting, exhaust fan and electrical connection. The exterior must contain a design publicizing the recycling of Styrofoam (polystyrene). The size of the unit shall be a minimum of 8’ wide x 20’ long and shall accommodate ample working space around the densifier unit along with a separate 80-100 sf storage area for bulk bags of foam. 2. The mobile metal weather-resistant container shall be equipped with one (1) 200 lb. per hour(minimum) hot melt foam densifier with a shielded hopper opening to reduce flying foam particles, start and stop switch, and temperature gauge. 3. The mobile metal weather-resistant container’s overall design shall be included with the bid and show the densifier’s placement, access points, lighting, electrical connections, air flow, storage area and signage. 4. The stand-alone all-weather metal collection bins shall be approximately 47.5" W x 39.5" D x 76.5" H with a hinged door, plastic flaps at the opening to keep out the elements and be able to hang a 2.0 CY/1.5 ton standard polybag from four (4) hooks inside. 5. The poly bulk bags shall each be 2.0 CY/1.5 ton closed bottom, open top, reinforced corner seams and corner loops for hanging.
