Specifications include, but are not limited to: A. Manufacturers: Subject to compliance with requirements, provide products by one of the following pre-approved manufacturers. 1. Activation Devices: a. SDC Security 2. Door Devices: a. SDC Security 3. Door Hardware: a. SDC Security B. Activation Devices 1. Door Release a. Mount: Wall Mount b. Type: Single Pole, Double Throw. c. Operation: Momentary. d. Finish: Coordinate with Architect. e. Function: Release door indicated. f. Coordinate exact location with Owner prior to installation. g. Refer to detail drawings. h. Design Basis: SDC 460 Series C. Door Devices: 1. Request-to-Exit (RQE) Motion Sensor a. Provide motion sensor and cabling for connection to door. Refer to detail drawings for installation. b. Mount: On door frame above door, refer to detail drawings. c. Power: Match EAC power supply. d. Alarm Output: Two Form C relay contacts. e. Indicators: One activation LED. f. Coverage: 8ft x 10ft. g. Finish: Coordinate with Architect. h. Design Basis: SDC MD-31D D. Door Hardware 1. Mag-Lock a. Furnished with door hardware. Security Contractor shall provide cabling and connection access control panel. b. Provide mag-lock to meet specification as follows: 1) Power: Match EAC power supply. 2) Type: Shear Lock 3) Features: (a) 2000lbs hold force. (b) Integrated DPS. (c) 400mA draw or less. (d) Required mounting brackets. 4) Finish: Match door hardware. 5) Mount: Surface 6) Provide device and cabling for connection to door. Refer to detail drawings for installation. 7) Provide fire alarm connection to release upon fire alarm activation. 8) Design Basis: SDC 1560 Series
