Specifications include, but are not limited to: DESCRIPTION: New current model backhoe/loader 4 speed forward and 2 speed reverse minimum power shift transmission with operator controlled forward/reverse function with transmission cut off function on the front loader lever Mechanical front wheel drive (MFWD) with limited slip front differential that can be shifted from four-wheel drive to two-wheel drive 95 gross horse power diesel engine at rated RPM minimum with cold weather assist starting system 120 volt engine block type heater Heavy duty hydraulic cooling system with a minimum of 28 gallons per minute flow Heavy duty rear axle with driver actuated 100% locking differential Spacers installed between rear wheels and rear axle hubs for clean out clearance between the inside of rear tires and cab Electronic throttle – foot and rotary hand controlled ENCLOSED CAB: Fully rated enclosed ROPS/FOPS cab with left and right access with convex mirrors on each side of cab exterior and one inside cab Heavy duty air conditioning with heater with cab filtration system AM/FM radio Maximum manufacturer insulation Front sun visor Heavy duty deluxe operator’s seat with fold up arm rests Full manufacturer’s system gauges and standard warning lights with engine hour meter Heavy duty LED lighting to provide 360° visibility Deluxe cab package to include console storage compartment and cup holders Locking fuel and DEF covers/caps FRONT LOADER: Heavy duty front loader with bucket position indicator and automatic return to dig function Bucket capacity to be 1.1 cubic yard capacity minimum with bolt on reversible cutting edge and integral lifting lugs or eyes on bucket Single lever control for all loader functions with the self-leveling or return to dig functions along with the ground drive disconnect function on lever Bucket hinge pin height 11’ 3” minimum Loader lift cylinder break at force 9,500 pounds minimum Integral loader frame lift safety stop system Operator controlled loader ride stabilization function
