• The body shall be compatible with the Swaploader SL400 and the Stellar Slider 40 hook lift system. • 16’ length; 96” width plus outside rub rails and stake pockets • 6” x 4” x 3/8” angle side rails • 3” channel crossmembers, 12” on center • Floor: Oak square cut • Steel headboard: 48” height w/ full width screen window and 6” load ears. Headboard corner posts extended down with pads to accommodate the ratchets. • [4ea] underbody ratchets with 4” x 30’ straps, slide rail (curbside) • Undersling rail (SS) – 3/8” x 2” • (1) Chrome load bar with headboard storage • Hooklift skid constructed of 6” x 2” x ¼” wall tubing and include front a-frame (6” x 2” x ¼” tubing), 2 ½” diameter hook bar, 61 ¾” hook height, pair of 8 ½” OD diameter x 10” long steel rollers. • PAINT/PREPARATION: o To ensure proper adhesion and a durable finish of final coating, body manufacturer shall first clean ALL surfaces of oils, greases and scale by COMMERCIAL ABRASIVE BLAST CLEANING (SSPC-SP-6) o apply TWO (2) coats of Rust-Oleum, Heavy Duty Gray Primer #HS9381 or HB Urethane primer base Red Oxide to a minimum thickness of FIVE (5) Mils. o Final coat, Lead free Omaha Orange o Supply 2 complete sets of SDS sheets for coatings used • Undercoat body • Supply and install conspicuity tape that shall meet the FVMVSS108 US DOT-C2 requirements • Warranty workmanship and materials for 3 years from date of acceptance by DOT
