Specifications include, but are not limited to: 1. CORE DUTIES COMPLETED TWICE A WEEK ON MONDAY AND THURSDAY, EXCLUDING STATE HOLIDAYS (UNLESS OTHERWISE INDICATED): a. Sweep deck and pit in Inspection Bay. (THURSDAY ONLY) b. Dust all surfaces including but not limited to tables, desks, file cabinets, bookcases, chairs, window sills, counter tops and counter base ledges with furniture polish. c. Clean computer screens, TV screens and keyboards. d. Dust mop and damp mop all tile floors. e. Thoroughly clean interior and exterior restrooms, including all fixtures (stool, lavatories, sinks, urinals, dispensers, etc.) with a germicidal cleaner. f. Clean the mirrors. g. Vacuum all carpet areas and rugs and spot clean carpet as needed. h. Clean and sanitize all drinking fountains. i. Clean and sanitize shower in locker room area j. Empty all waste receptacles and change liners as needed. Trash liners shall be furnished by the State and will be kept in the janitor’s closet. Contractor shall be responsible to notify the Department’s contact person in writing when supplies are low. k. Remove trash and dispose in the outside dumpster. l. Clean road tar, grease and/or scuffs from all floors. m. Damp mop or scrub as needed tile floor in the public area of the building (driver area in front of the counter). n. Clean and sanitize the sink and counter top in the training room (use lime remover and stainless steel cleaner as needed). o. Replenish toilet paper holders, paper towel and soap dispensers. Toilet paper, paper towels and hand soap shall be furnished by the State and shall be stored in the janitor’s closet. Contractor shall be responsible to notify the Department’s contact person in writing when supplies are low. p. Clean door surfaces and door handles to remove finger prints and smudges. q. Clean light switch plates, and the wall surfaces around the light switch plates to remove finger prints and smudges. r. Remove bugs and debris from light fixtures. s. Maintain janitor’s closet and mechanical room in a clean, neat and orderly fashion. t. Complete sign in sheet located in mechanical room. Information required on the sign-in sheet includes the signature of the contractor’s employee, and date that the facility was cleaned (see Attachment B, Sign-In Sheet). 2. CORE DUTIES COMPLETED ONE TIME-EVERY THREE MONTHS SHALL INCLUDE THE FOLLOWING AND SHALL BE CONDUCTED ON THE SCHEDULE LISTED BELOW, EXCLUDING STATE HOLIDAYS (UNLESS OTHERWISE INDICATED): Schedule First week in January First week in April First week in July First week in October a. Scrub, clean, and strip tile floors. Wax with 3 coats of commercial grade wax and buff to a high luster. b. Remove wax and dirt build up from the baseboards.
