Specifications include, but are not limited to: GENERAL: • The unit provided shall be new, of current manufacturing design of 2023 or 2024 model year with a GVW rating approximately 23000lbs. • Proposer shall provide a list of (3) customers using specific model proposed. • The unit shall be delivered fully upfitted as outlined. • In comparing proposals, consideration will not be confined to price only. Successful proposer will be one whose product is judged to best service specific interests of the Town when price, performance, safety, quality and field experience of specific model proposed are considered. MODEL: • 2023 or 2024 4x4 • Regular cab EXTERIOR: • White • Heated Mirrors POWERTRAIN: • Automatic Transmission • Transmission mounted power take-off provision • Diesel / Gas engine: minimum standard output of 320 HP 700lbs Torque • Minimum 25 gal. fuel tank • Locking differential INTERIOR: • Standard Air Conditioning • AM/FM stereo • Power windows • Power Locks • 12V accessory port • Up-fitter Switches • Trailer Brake Controller • Instrumentation with tachometer and message center including odometer, trip odometer, distance-to-empty, average fuel economy, engine hour meter and warning messages WHEELS AND FRAME: • 19.5 wheels • 165” wheelbase • 84” cab to axle • Straight frame • Frame rail extensions for plow up-fitting if necessary • M/S traction tires WARRANTIES: • Standard basic coverage • Extended warranties will be considered for engine, transmission, and drivetrain Front Plow: • Everest VRL120S2737CSA-H 10’ Wing Plow: • Everest ACPLF/ACPL12/ST/60 patrol style wing system • Everest W132-S-15 11’ moldboard with 10’ cutting edge. Spreader: • Swenson MDV-A hydraulic auger drive with front and rear spill shields installed • 9’ length • 4 yard capacity • In cab control • Incorporated pre-wet system, min 60 gal. capacity with nozzles installed over discharge on top of chute Dump body: • Everest MSL10SS1620-H1 / Single shuttle door in tailgate • Drivers side folding ladder • Shovel holder under cab sheild • Electric load cover system with solid tarp • In cab body up indicator General Upfitting: • Pintle plate with 2.5” receiver, d-rings and 7 flat RV style trailer plug • Front and rear mudflaps with set of anti-sail brackets • 25 gallon side mounted hydraulic tank with sight glass • Hydraulic pump with clutch or transmission mounted PTO pump (no live systems) • Hydraulic system sized properly with capacity capable to operate all equipment without interference • Standard hydraulic push / pull lever controls for plow and body operation mounted in series at towns approved location. Dump body control to be of the locking type mounted to far right of control bank • Spreader connection fittings located at the rear of the body with all lines running under the body being stainless steel hard piped. • LED heated plow lights • LED wing light • LED spreader light • LED amber strobes mounted in front and side of cab shield and in rear post • All other required DOT lighting, STOP/TURN/TAIL, back up, ICC and plate lights • On-spot safety chain system
