Specifications include, but are not limited to: Vacuum Tanker Trailer One Requirements • Approximately 4000-Gallon Capacity • Rated to haul leachate or sewer wastewater products • Construction: Aircraft Aluminum • Front head mounting aluminum air pipe for primary hose hookup • 4” Aluminum heated collar on rear inlet • 6” aluminum heated collar on rear discharge • Mounted Backup Camera • Long Sills: 4” x 8” x 3/8” aluminum extruded angle and welded to tank floor • One Compartment • Hose Protector: Bolt-on aluminum extruded hose protector installed on both sides of the tanks • Bumper: One rear steel square tubing bumper • Ladder: One curbside ladder with grip-strut steps to the top manway. • Troughs: One trough on each side of the tank is made of 0.125 polished aluminum with an aluminum extruded rub rail. Front and rear fenderettes included. • Level indicators: Three 5” sight glasses installed in the rear head • Manways: Two 20” manways, one on the top and one in the read with stainless steel lids • Inlet: One 4” flanged rear inlet with a riser pipe and stainless steel deflector plate. • Outlet: 1 6” flanged rear outlet • Primary Shut-Off: One 12” primary shut-off in the front of the tank with a 3” hose connection. Included with a front aluminum air pipe on the front head to hook hose from primary to and then to pump. • Hose Holder: Rear “A” frame hose installed on read manway • Relief Valve: 2” pressure relief valve on the top of the tank • Must be able to be installed on a Kenworth T480 Vehicle
