Specifications include, but are not limited to: The SD Dept of Game, Fish & Parks is looking for a vendor to provide excellent quality printing for the Annual Walk-In Area Signs and GPA Sign Order. GENERAL SPECIFICATIONS #1; Signs 10" X 14" weather resistant with rounded corners. To be .125 ga. thick and made of highdensity linear polyethylene (95% or virgin poly with ultra-violet inhibitors, modified polyethylenenot acceptable). Legend applied by silk screen process using ink compatible with High Density Linear Polyethylene and bonded to the material and the ink is to contain Ultra-Violet Inhibitors. Each sign is to have two 3/8" holes located on the vertical center line spaced 1 1/2" from top and bottom of the sign to the center of the hole. A urethane composition clearcoat with UltraViolet Inhibitors applied after printing. Proof of art work must be submitted. Signs must be guaranteed not to fade, bleed, or clearcoat flaking under normal outdoor conditions for at least 3 years. GENERAL SPECIFICATIONS #2; 12" X 18" in size with rounded corners. To be .125 ga thick and made of high-density linear polyethylene (95% of virgin poly with ultra-violet inhibitors, modified polyethylene-not acceptable) or 1/8" plastic reinforced fiberglass with cellulose fiber reinforcing. Legend to be put on signs with silk screening process using ink compatible with High Density Linear Polyethylene and bonded to the material and the ink is to contain Ultra-Violet Inhibitors. Each sign to have two holes 3/8" diameter, spaced 1 1/2" from top and bottom of the sign to the center of the hole. Lettering on sign to be of size and similar arrangement as per samples submitted. All decals must be included in accordance with sample and of acceptable quality workmanship. A urethane composition clearcoat with Ultra-Violet Inhibitors applied after printing. Proof of art work must be submitted. Signs must be guaranteed not to fade, bleed, or clearcoat flaking under normal outdoor conditions for at least 3 years; GENERAL SPECIFICATION #3; 6" X 10" in Size with rounded corners. To be .125 ga thick and made of high-density linear polyethylene (95% of virgin poly with ultra-violet inhibitors, modified polyethylene-not acceptable). Legend to be put on signs with silk screening process using ink compatible with High Density Linear Polyethylene and bonded to the material and the ink is to contain UltraViolet Inhibitors. All decals must be included in accordance with sample and of acceptable quality workmanship. Each sign is to have two 3/8" holes located on the vertical center line spaced 1 1/2" from top and bottom of the sign to the center of the hole. Lettering on signs to be of size and similar arrangement as per sample submitted. A urethane composition clearcoat with Ultra-Violet Inhibitors applied after printing. Proof of art work must be submitted. Signs must be guaranteed not to fade, bleed, or clearcoat flaking under normal outdoor conditions for at least 3 years.
