Specifications include, but are not limited to: Manufacturer to provide one tank with the following: (1) Insulated Live Haul Tank, 52" wide OD x 102" long OD x 36" high (~58” wide including dump coupling, ~107” long including dump coupling); Double Wall Insulated Aluminum All Welded Construction; 2” Thick Polyurethane Foam Insulation; 0.125” 5052 Aluminum Inner Tank minimum; 0.080” 5052 Aluminum Outer Skin minimum; 2 Inner Tank Compartments @ ~300 gallons; 4” Sloped Compartment Floor toward ejection port back to front (2); 4” Sloped Outside Corners toward ejection port from sides (4); One Recessed Ejection Port per compartment (2); Layout: 1 Driver’s side ejection and 1 Rear ejection port; Reinforced raised floor around ejection port transition required; Tank should sit flat on truck deck without blocking; 6” Camlock Ejection Ports w/ leak free cap (2); One T-Handle (recessed) per compartment (2); One Aluminum Slide Gate per compartment to fit ejection recess (2); Two Freshflow Aerator Brackets or equivalent hold-down system per compartment (4); Located toward opposite rear corners; One 5” Screened Air Intake per compartment (2); One 1” Diameter Screened Overflow Hole per compartment (2); Located ~31” up from outer tank bottom; One ¾” Diameter Hole For Oxygen Tubing at rear of each compartment (2); Large Latching Piano Hinged Lids w/ Handles for full compartment access (2); Jackknife Lid Stops or Strut System to safely hold lids open (2); Leak Tight Seal around lids; Lid Clamps 5” long with stainless steel wing nut (4) or equivalent hold-down system; Lifting Lugs Each Corner (4) (3/16” thick x 2” wide minimum) or equivalent D-ring system; Integral Mounting Brackets welded near each corner (4); Located on long side of the tank near the front and back (location TBD); Extra Mounting Brackets to be left loose for staff to mount stocking nets (4).
