Specifications include, but are not limited to: - All platform body components shall be properly designed and built for stresses that may occur during fabrication, shipping, installation, and intermittent or continuous operation. - Workmanship shall be of high industrial standards in all respects. - Installation on truck shall be included. - Manufacturer to submit complete assembly drawings for approval prior to assembly. - Manufacturer to provide any product warranty information. Description: Provide one custom platform body to outfit a 2024 Ford F6750 (Wheelbase 194”, 120”CA) - 16' Length, 8' Width - 6” x 4” x 3/8” Angle side rails - 4" channel cross members, 12" on center - 8" channel long sills, gussets on alternate cross sills - Mount to allow 9" space for stocking tubes (provided by DIFW) between long sills - 1/4" steel rear apron with cutouts for lights - One bottom hinged central rear access door for under bed hose storage - Floor: Composite decking - 1/8” gap between each composite decking to allow for expansion - Headboard (inset) w/ angled top corners: Composite decking to cab height w/ 1/8” gap - Width to allow driver to see deck w/mirrors and provide easy walking access from cab - Stake pockets: NONE - Lighting: Body to include sealed LED trailer style brake and back-up lights, and reflectors - Body must be undercoated - Steel to be primed and painted - Black - 3/8” x 4” Flat bar welded on top of cross members at 41" to 45” (43”oc) from center of body - Rear spare tire rack under-mounted behind rear axle - One step both front driver and passenger side to access body from cab - One rear access step ladder or welded steps, with grab handle - Two 16’ long, 12” wide fold down hinged aluminum grip strut walk around installed with 3 easy reach support slides (through body) each side (shim body up 1/8” to accommodate) - Two rear tow hooks mounted to frame next to spare tire - Tool boxes may be added by separate order
