Specifications include, but are not limited to: 2 Each APPLICATION 2024 GMC C2500, SRW, Reg.Cab, 2wd, 6.6 V-8 gas, 10000 GVW, 142" WB, CA 56", OE body to be removed by the vendor and any transferable wiring and components such as the back up camera and towing utitlized for the new body; BODY SIZE Length: 96" Width: 78" Floor Width: 38" Cabinet Height: 40"; BODY SHELL 14 gauge two-sided galvanized steel or galvanneal. Compartment top and back to be one piece seamless design. Drip rails above all doors. All doors, door openings, drip rails, and other exposed steel edges to be hemmed for strength and safety. Eight mounting points, four per side. Undercoated steel rock guards at rear of wheel wells. Aluminum rock guards at front of body. FLOOR 12 gauge smooth plate with 1-3/8" return flange on each side. Cargo tie-downs mounted in each of the 4 corners. Rhinoliner (or equivalent) on floor and 1/2 way up cabinet in load area. TAILGATE 12" Slammable tailgate, pickup style release handle in the center, 14 gauge double panel construction, parallel to floor when in the down position; WEATHER STRIPPING Heavy duty, closed cell automotive type; EXTERIOR COMPARTMENTS CONSTRUCTION Side compartment back panel overlaps and interlocks with floor flange for compartment weight support. 20 gauge 2 sided galvanized steel double panel exterior doors with 2 stage slam type rotary latches, heavy duty adjustable strikers, theft proof replaceable hinges, keyed alike locks. Single chains or cables on all vertical doors. Double chains or cables on all horizontal doors. Shelves to be 18 gauge galvanized, hemmed, rated for 250lb. capacity, with multiple divider kits. Drains and vents in all compartments. Note-All stainless steel latches, hinges, & hardware!! EXTERIOR COMPARTMENTS LAYOUT Street Side & Curb side: Front Compartments= 40"h x 31"w x 20"d with two adjustable shelves per side. Horizontal compartments= 44"w x 20"d with no shelves. Rear Compartments=40"h x 21"w x 20"d with one shelf per side. LIGHTS FMVSS lighting package. Quick connect loomed wiring harness. Flush mounted tail and backup lights, clearance lights and reflectors. License plate light with bracket. PAINT All steel surfaces galvanized and epoxy primer. Exterior paint to be Aliphatic polyurethane enamel such as Dupont Imron 3.5, Caterpillar yellow, code "423133". Interior color to be reflective gray or white. All undercarriage surfaces to be fully undercoated with petroleum base material.
