Specifications include, but are not limited to: General. This sealant shall be a self-leveling, low modulus, hot applied sealant consisting of petropolymers that is used to seal cracks in asphaltic pavements and joints in concrete pavements. The sealant shall remain pliable at temperatures to minus 400 F (-40 C) and meet the requirements of ASTM D 6690, Type IV, (AASHTO M 324, Type IV) with the following modifications: Requirements. Sealant shall meet the requirements of ASTM D 6690, Type IV, (AASHTO M 324, Type IV) with the following modifications: Penetration at 770 F = 120 - 150 Bond at -200 F., 3 cycles, 200% extension = Pass The sealant shall weigh not less than 9.00 pounds/gallon nor more than 9.35 pounds/gallon. Acceptance. The Department will accept the sealant based on the manufacturer's certification of the supplied product. The Department reserves the right to select a sample from each lot of material supplied. If any of the sealant fails to meet the properties specified, but the quality deviation is not serious enough to materially affect the work quality, payment for the sealant will be reduced at the following rate up to 20% of the invoice price per ton.
