Specifications include, but are not limited to: Sealed Bids for the purchase of a plow, sander, and dump body package to outfit a class 8,40,000 pound or greater cab and chassis provided by the Town. 1. Front hitch: Everest power tilt with remote tilt operation from front of truck or equivalent. 2.Intensifier plow lights or equivalent. 3.Everest cable wing system or equivalent. Cable at rear of wing, hydraulic over cable at front of wing. 4.American 11-foot power reversible plow with carbide cutting edge, gravel road shoes, and dead sheave leveling system, or equivalent. 5.Everest 10-foot steel wing blade (9 foot cutting edge) with trip capability in the wing arms and front block, with carbide edges. 6. Everest 10-foot stainless steel dump body or equivalent with underbody hoist,1scuttle door in center, pintle plate, D rings, 30-ton pintle hook, automatic load cover, and hard poly fenders. Stainless cab protector to extend over 75 percent of truck roof. Stainless steel folding ladder, left front. 7. Prep pintle plate for hydraulic sander and trailer with air brakes. Install Parker 6600 series QD fittings for sander, hydraulic connection to truck. Provide trailer gladhands mounted on plate. Provide 7-way plastic commercial trailer electric connector. 8. HPF custom hydraulic system, tandem pump, commercial valves, quadco lever controls, or equivalent. 9.Muncie MESP 300 ground speed actuated spreader control. 10.HPF Custom LED light package: LED stop, turn, reverse lights, LED strobes in cab shield and in rear posts, LED wing light, 2 reverse lights and one salt spreader light mounted on sander and wired in to a plastic 7-way RV connector in pintle plate.
