Specifications include, but are not limited to: Contractor agrees to provide to the Department of California Highway Patrol (CHP) Buellton Area office the services described herein: furnish all supplies, materials, tools, equipment, labor, personnel, and supervision; pay all taxes, insurance, bonds, license and permit fees, and all other direct and indirect costs necessary for the quarterly maintenance services on the automatic gates/roll-up doors in accordance with the terms set forth in this Agreement. 5. Contractor shall provide quarterly maintenance every ninety (90) days as identified below and services are to consist of the following: A. Lube all points of friction, including but not limited to, rollers, bearings, gears, and guides, etc. B. Ensure the gates are balanced, the motor limiters are properly adjusted, the drive chains are tight, and the manual system is in proper working order, etc. C. Inspect and test the function of the gates, including but not limited to, the electrical wiring and connections, chain, chain shafts, gears, and bearings, etc. D. Quarterly maintenance supplies shall include, but is not limited to, belts, cleaning chemicals, oil, grease, cleaning rags, switches, and fuses. E. Oiling all moving parts, align, tighten drive chain on gate, set limit switches, etc. F. Inspect motor and clutch mechanism for wear. G. Inspect bearings, gears, and shafts for wear. H. Check oil and fluid levels, fill if needed. I. Grease chain shafts, bearings, etc. J. Inspect all electrical parts and wiring including touch pad controls and ground loops. This includes radio receivers. Any work requiring a C-7 or C-10 license will not be covered under this contract.
