Specifications include, but are not limited to: Engine a. Six cylinders, turbocharged, charge air cooled diesel; designed and built by the manufacturer b. Shall be certified to EPA Final Tier 4/EU Stage V c. Max net power according to SAE J1349 shall be at least 230 hp at 2100 rpm d. Displacement shall be no less than 6.8 liters e. Shall develop at least a 58% torque rise and should have at least 783 lb-ft @1400 rpm f. Daily check points shall be accessible from one side of the engine and shall be done from ground level g. Dry-type air cleaner (under hood); dual element with a restriction sensor and incab restriction warning light; to be accessible without tools h. Loader shall have pre-screened under hood air intake to minimize plugging i. Automatic engine regeneration allowing manual activation when required without affecting work ability j. Access to engine will be open from both sides with side opening, full access service doors k. Shall have no less than 10-micron rated primary fuel filter with water separator l. Loader shall be equipped with a heavy-duty steel fuel tank guard m. Shall have a programmable auto-shutdown and auto-idle (900-1250rpm) feature for the engine as standard equipment n. Electrical system shall be 24 volts with 100-amp (140 amp optional) alternator o. Shall have automatic glow plugs/block heater based on intercooler air temp below 46F for cold start
