Specifications include, but are not limited to: 1. Contractor shall perform the removal of existing Shingles and Felt as well as the removal of all debris from project site. 2. Contractor shall furnish materials, tools and labor and equipment to install new drip edge and StormTread synthetic roofing underlayment or equivalent. 3. Contractor shall use a 30- year architectural shingles on roof Approx. (672’ sq. ft. ) of roof area. And Approx. (104’ lin. Ft. drip edge) and Approx. (24’ lin. Ft. vent ridge. 4. Contractor shall cut back decking and underlayment (approx. 2" from center line on both sides of ridge for ventilation for new vent ridge. 5. The color of shingles shall best match existing and other roofs if close to the one that’s being replaced. 6. Contractor shall install the entire roof system to meet manufacturer’s specifications and any state, county, and city building codes. 7. Contractor shall install new roof vent boots/jacks. Roof vent boots & flashing, and chimney flashing to be painted color to best match roof. 8. Contractor shall remove turbine vents if applicable and patch decking. 9. Contractor shall be responsible for re-sealing all roof penetrations. 10. Contractor shall be responsible for replacing any damage, rotten decking or fascia and drip edge lumber to match existing and to re-nailing lose decking or fascia.
