Specifications include, but are not limited to: • Capacity: 100,000 lbs. at 55 MPH (100,000 lbs. concentrated in a 16-foot area). • Construction: To be a four-beam trailer with four (4) linkages, one on each main beam. All frame components to be a minimum of 80,000 or 100,000 psi yield strength material. All steel used in fabrication shall be 80,000 or 100,000 psi with a tensile strength of 100,000 or 120,000 psi. I-beam main frame construction, main beams to be 16” deep. Web material will be minimum ¼” 80,000 psi yield. Overall length of 57’. Double drop deck design maximum 30” loaded deck height. Shall have deck length of 32’. Deck shall be full width (108”) with minimum 2” Apitong wood, raised 3/8”. Rear deck over running gear and rear slope to be full width and covered in steel diamond plate or approved equal material to reduce slipping and improve traction, material needs to be ¼ punched. Removable ramps from rear slope to lower deck shall be a minimum of 48” long and improve traction and be strong enough to support weight of load. • Gooseneck: To be hydraulic folding design. Shall have hydraulic self-lifting and leveling landing gear. Must have the ability to lift fully loaded trailer. Hydraulic folding neck shall utilize (2) 4.5”x30” hydraulic lift cylinders. Length of gooseneck will be 10’ with swing clearance of 96”. Loaded 5th wheel height will be 50”. King pin setting will be 16”. Tapered front to extend to approximately 26” ahead of king pin 10” added to front of neck.
