Specifications include, but are not limited to: 1. Prospective contractor shall perform the removal of existing ridge cap and any old sealant, closure under old cap. And the removal of all debris from project site. 2. Prospective contractor shall be responsible for all safety barriers like orange construction fence to keep bystanders out of work areas and at a safe distance or equivalent. 3. Prospective contractor shall be responsible for any permits that maybe required. 4. Prospective contractor shall be responsible for cleaning and preparations to ensure all new vent jacks and closers seal properly. 5. Prospective contractor shall furnish all materials, tools and labor, equipment to install new ridge cap Approx. (170’ lin. Ft. ridge cap) and new closure, sealant, and fasteners. 6. The color of ridge cap shall best match existing one that’s being replaced. 7. Prospective contractor shall install the new ridge cap system shall meet manufacturer’s specifications and any state, county, and city building codes. 8. Prospective contractor shall install new roof vent boots/jacks. Roof vent boots & flashing, color to best match existing roof.
