Specifications include, but are not limited to: Asphalt Roof Assembly 1: • Complete tear off, including all underlayment and flashings (step, gutter apron, and edging material) • Ice and water shield up 6’0” from edges, and installed wherever step flashing is used, and in all valleys. • 30lb or synthetic underlayment to be installed. • Certainteed Landmark Pro shingles to be used. Color TBD by owner. • Replace all drip edge and gutter apron. Color TBD by owner • All ridges to have ridge vents installed, cut out per manufacturer specs • Roof classification minimum type B • Install plumbing stack vent shields color matched. • Provide unit price to re-deck if needed. Slate Roof Assembly 2: • Complete tear off, including all underlayment and flashings (step, gutter apron, and edging material) • 30lb or synthetic underlayment to be installed. • Davinci composite slate w/8” exposure non-staggered to be used. Color TBD by owner. • Replace all drip edge and gutter apron. Color TBD by owner • Reuse top decorative piece. • Roof classification minimum type B • Install plumbing stack vent shields color matched. • Provide unit price to re-deck if needed.
