Specifications include, but are not limited to: A. OVERHAUL (once annually) Strip bike down to frame and reassemble. Perform all work as performed in MAJOR TUNE UP to manufacturer’s specifications. 1. PARTS TO BE REPLACED: a) Brake cables b) Derailer cables c) Cables d) Brake pads (Aztec Brand, Stud Style only) or equivalent e) Bearings in headset, bottom bracket and hubs f) Any bicycle components that appear to be defective or worn 2. INSPECT AND REPLACE (if necessary): a) Cassette cogs and chain rings b) Cable housing c) Handlebar grips d) Pedals e) Shifter B. MAJOR TUNE UP (once annually, at six months after overhaul): Tune-up to be done to manufacturer’s specifications. 1. The following are to be inspected and adjusted: a) Inspect rims and spokes for damage and replace if necessary b) Adjust front and rear brakes c) Lube cables d) Inspect brake pads e) Adjust front and rear derailer, replace if necessary f) Lube derailer cables g) Adjust headset; replace if necessary h) Clean chain and replace if necessary i) Remove cassette cogs, clean and replace worn cogs or chain rings j) Adjust from and rear hub; replace if necessary k) True front and rear wheels off bike (Remove front and rear wheels and use stand for truing)
