Specifications include, but are not limited to: Sections 1 and Alternates ending in 1A,2A,3A – This or equivalent: New Roof Scope of work: 1) Remove any foreign debris from roof surface and make sure it is dry. 2) Slice the existing EPDM so the new roof system can be installed properly. 3) Mechanically fasten ½” wood fiberboard over the complete field. 4) Adhere new 60 mil EPDM over the wood fiberboard. 5) Properly flash all curbs and penetrations per manufacturers guidelines. 6) Provide and install new metal edging around the outer perimeter. 7) Provide 10 Year Warranty VER EPDM 60M; Celotex ½” High Fiberboard; VER 3” Accutrac Plate Flat; VER HPV Fasteners; VER QA Flashing; VER QA Pipe Boot 1”-6”; VER Bonding Adhesive; VER Weathered Membrane cleaner; VER Tape Primer; VER Versico G300LS Lap Sealant Black; VER Versico G500CM Water Cut-Off ;
