Specifications include, but are not limited to: • The manufacture of 840 LF of 10’X4’ Precast CONC BOX CULVERT (GDOT STD. 2530P) according to the details on the attached plan sheets. To include Joint sealant materials, shims and other incidentals. • The manufacture of 250 LF of 7’X4’ Precast CONC BOX CULVERT (GDOT STD. 2530P) according to the details on the attached plan sheets. To include Joint sealant materials, shims and other incidentals. • The manufacture of STORM DRAIN PIPE, 18 Inch, H 1-10, RCP to include Gaskets • The manufacture of STORM DRAIN PIPE, 24 Inch, H 1-10, RCP to include Gaskets • The manufacture of STORM DRAIN PIPE, 30 Inch, H 1-10, RCP to include Gaskets • The manufacture of STORM DRAIN PIPE, 36 Inch, H 1-10, RCP to include Gaskets • The manufacture of FLARED END SECTION, 18 Inch, Concrete (GDOT STD.1120) to include Gaskets • The Manufacture of FLARED END SECTION, 24 Inch, Concrete (GDOT STD.1120) to include Gaskets • Glynn County or Construction Contractor will be responsible for providing the equipment to unload the culvert. • Upon award or contract and issuance of a purchase order, manufacturer shall provide shop drawings stamped by a Professional Engineer to be reviewed and approved by Glynn County Engineering Staff. Shop drawings shall include applicable design standards, material specifications, and details for storage, handling, lifting, and delivery.
