Specifications include, but are not limited to: Clatsop County Public Works Department is looking to have a new fueling station constructed per the attached fuel pad design plans and specifications below. The fuel tank itself is on-site and the placing of the tank shall be included in the proposal. All components shall be tested prior to acceptance by the County. The work to be done under this RFP consists of the following: 1. Design, procure, install, and test all new fuel tank system and components as described herein. The Contractor will be responsible for all necessary permits and approvals. Provide all equipment, materials, labor and incidental work necessary to complete the project. 2. Contractor will comply with all OSHA safety guidelines. 3. Contractor is responsible for all foundation excavation. Spoils from excavation must be hauled away. 4. Contractor to design and install the drainage system for the pad per the preliminary plan. County can provide all necessary topographic surveying as well as necessary construction staking. 5. Contractor to construct the fuel pad and deep foundations per the design plans by Pace Engineering and geotechnical reports by PBS. 6. Contractor shall contract with PBS to observe pile driving activity. If Contractor intends to use augercast piles, then the Contractor shall contract with Pace engineering for inspection services. Contract with Pace Engineering for submittal reviews and required inspections for pad construction. 7. Contractor is solely responsible for accurate, good quality workmanship in constructing the fuel pad in conformance with these drawings, details referenced in the drawings as well industry standards. See design plans for additional notes and instructions. 8. Installation of the provided fuel tank with earthquake restraints to the fuel pad per local seismic requirements. The fuel tank is existing and on site. Fuel tank information is included in this request for proposals.
