Contractor shall provide equipment capable of supplying at least 34,000 pounds of known weight. Known weight shall include at least 20,000 pounds of test weight. B. Routine service to be performed semi-annually with the first semi-annual service being performed within 30 days of contract execution and every six months thereafter. C. All work shall be unconditionally guaranteed for one year barring any damage that is outside of the Contractor's control. The warranty shall become effective when the State approves the completed work. D. All quotations for additional services not covered under this agreement are to be provided by the contactor at no cost to the State. E. Contractor shall take all necessary precautions to protect service locations. Any damage caused by Contractor to State equipment or materials shall be repaired or replaced by Contractor to the satisfaction of the State at no cost to the State. The State may, at its option, repair any damage and deduct from Contractor the cost thereof. F. After every service the scale pit shall be cleaned of all debris and the debris removed from the facility. The Contractor is entitled to reimbursement for the removal/disposal of waste materials from the facility. The cost for removal and disposal of waste shall be included in the service charges. G. Materials for use in this project shall be the best grade products of the types specified by the scale manufacturer or as approved by the CHP on-site contact. H. Contractor shall conform with the Cal/OSHA requirements stated in Title 8, pertaining to confined space and entry procedures. I. Should adjustment, calibration, or servicing of electronic equipment require any software upgrades, a copy of the software or documentation shall be provided to the State at no additional cost. Calibration, adjustment, and servicing of any electronic equipment shall not be locked out with a password or by any other means.