Specifications include, but are not limited to: 1. 29" wide minimum sized sheet pan peg belt/rack 2. Dual Rinse 3. Automatic tank fill 4. Electric eye idle pump shut off and rinse saver 5. Push button start stop station - load end 6. SST pumps and impellers 7. Load end recirculating flush nozzles 8. Antijam and reverse switch 9. Vent openings, with locking dampers at both ends 10. Coordinate with manufacturer to be on site for coordination of reassembly of product 11. Minimum 1-year parts and labor warranty 12. Must be NSF, UL 13. 2.5' Load section, 2.5' Prewash section (with external scrap tank with basket), 4' wash section, 5' dual rinse section. Electric blower dryer - 4' long 14. Voltage 480/60/3 phase, 3-point connection 15. Electric booster heaters - 70-degree rise 16. Heat recovery system 17. Start/Stop station - both ends 18. Medium security package. Includes stainless steel locking grid over control cabinet, tamper proof screws, locking hinged lid on PW basket, welded curtain hooks, lockable doors (locks by others), mesh cover on pressure gauge. 19. Insulated hoods - lower panels 20. 3 Hp motor pumps 21. Bumper rail 22. Drain water tempering kit 23. Insulated hinged doors 24. Drain interlocks 25. Ion scale prevention system 26. Electric heaters with thermostat and positive low-water cut-off...
