Specifications include, but are not limited to: In accordance with the manufacturer's recommendations, the Annual Preventative Maintenance/Inspections, at a minimum, shall include, but are not be limited to the following: 1. Balance vertical pivot lift gate 2. Check motor and brushes 3. Lube fittings and bearings 4. Adjust belt tension (replace if necessary) 5. Check DIP switch settings 6. Test battery under load 7. Check proximity switches/magnets 8. Check springs for damage 9. Test safety loops 10. Inspect welds for cracks/damage 11. Check drive chain, gear, and sprockets 12. Test infrared safety beams 13. Inspect Pad and Post mountings 14. Check manual disconnect 15. Check and tighten fasteners as required 16. Test radio receiver...
