Specifications include, but are not limited to: ENGINE: Diesel, displacement of not less than 4.5L with minimum of 145 EPM (Boosted) HP at rated speed. TRANSMISSION: 16F x 16R semi-power shift with (4) gears and four (4)ranges. HYDRAULICS: Closed Center Load Sensing pressure and flow compensated system hydrostatic power steering variable displacement piston pump shell be 29 GPM min. Tractor shall also have heavy-duty flange oil collection bottles, lock hydraulic tapping port and low-pressure return quick coupler. ELECTRICAL SYSTEM: 12 VOLTS, Battery 1300 CCA, Alternator 120 Amps, Geared starter motor, 7 pin outlet for trailer equipment, 3 pin, 40 amp implement socket, ISO/JD 30 amp socket, 2 Roof Mounted single in outlets for beacon, keyed fuel shutoff, horn, safety start switch INSTRUMENTATION: Analog/digital instrument cluster with LCD display. WHEEL BASE: Length 104-106 inches FRONT AXLE: Class3 Max steering Angle 55 degrees REAR AXLE: Heavy duty flange-type with a wet plate differential lock that has electrohydraulic engagement. POWER TAKE-OFF: The tractor shall have an independent 540/1000 rpm system with interchangeable shaft for rpm (speed changes) 3-PT HITCH: Category II flexible link ends, with electronic draft control (Lower Link Sensing), and telescoping stabilizers. Lift capacity (OECD) with dual 80mm external rams shall be 8,338 lbs. TIRES AND WHEELS: Front Tires 13.6 R24. Rear 18.4R34 Wheels dish style no power adjust. Wheels should be two position design or adjustable for steep incline roadside mowing. BRAKES: Hydraulically operated were disc balanced system that is self-adjusting and equalizing with separate LH and RH controls, automatic engagement of 4WD for four-wheel braking when both brakes are applied simultaneously. FUEL TANK: Maximum size available.
