Specifications include, but are not limited to: 1. The Department is in need of various railroad tools and accessories to be utilized for industrial-type railroad functions and repairs at Camp Navajo located in Bellemont, AZ. The initial purchase shall be of the items listed below. Subsequent purchases of additions railroad tools and accessories shall include but not be limited to the items listed below. 2. Broach Cutters: 2.1. Broach Cutter – Twister Bit – 7/8” Depth of Cut, 7/8” Diameter. Bit shall be titanium aluminum nitride coated – Color: Black 2.2. Broach Cutter – Twister Bit – 7/8” Depth of Cut, 1” Diameter. Color: Black 2.3. Broach Cutter – Twister Bit – 7/8” Depth of Cut, 7/8” Diameter, ¾” Shank. Bit shall be titanium aluminum nitride coated – Color: Black 2.4. Broach Cutter – Twister Bit – 7/8” Depth of Cut, 11/16” Diameter, ¾” Shank. Color: Black 2.5. Broach Cutter, Twister Bit, 11/8" Diameter, 7/8" Depth of Cut, ¾ " Shank. Bit shall be titanium aluminum nitride coated – Color: Black 2.6. Broach Cutter, Twister Bit, 13/16" Diameter, 7/8" Depth of Cut, ¾" Shank. Color: Black 2.7. Broach Cutter, Twister Bit, 1¾" Diameter, 7/8" Depth of Cut. Bit shall be titanium aluminum nitride coated – Color: Black 2.8. Broach Cutter, Twister Bit, 13/8" Diameter, 7/8" Depth of Cut. Bit shall be titanium aluminum nitride coated – Color: Black 2.9. Broach Cutter, Twister Bit, 17/16" Diameter, 7/8" Depth of Cut. Bit shall be titanium aluminum nitride coated – Color: Black 2.10. Broach Cutter, Twister Bit, 11/2" Diameter, 7/8" Depth of Cut, ¾" Shank. Bit shall be titanium aluminum nitride coated – Color: Black 3. Cembre Hydraulic Rail Drill (or approved equal) 3.1. Hydraulic unit shall be capable of drilling the following rails: 115, 119, 132, 140 LB RE, 130 and 155 PS 3.2. Hydraulic Rail Drill shall include 3.2.1. Rail Clamp 3.2.2. Coolant Unit 3.2.3. Two (2) sets of rail shoes 3.2.4. Drilling Template 3.2.5. Accessory Pack and Storage Case 3.2.5.1. Pilot bits (cooling system control) 3.2.5.1.1. 7/8” depth of cut (QTY 1) 3.2.5.1.2. 2” depth of cut (QTY 1) 3.2.5.2. Spacer, type DPE (used with spiral bits and APE adaptor for cooling system) 3.2.5.3. Adapter, type ARE (used with cooling unit) 3.2.5.4. Grub screw, M8x10, 4pcs (for clamping cutters/bits onto spindle 3.2.5.5. Socket head cap screws, M6x16, 4pcs (for securing positioning shoes) 3.2.5.6. Socket head cap screws, M6x25, 4pcs (for securing special positioning shoes. 3.2.5.7. Range tool keys 3.2.5.7.1. 5mm allen key 3.2.5.7.2. 6mm allen key 3.2.5.7.3. 4mm allen key with handle 3.2.5.7.4. spark plug key 3.2.5.7.5. brush 3.2.5.8. 3.4 fl oz oil bottle (for gear sump) 3.2.5.9. Cooling Unit (type SR5000 or equal)
