Specifications include, but are not limited to: Exterior Work • Completely remove all old exterior paint to bare wood as best as practical without damage, (including porch balusters, rails, columns, trim, etc.), repair/place any damaged or decayed wood and apply min of one (1) prime coat and two (2) top coats (final coats) using products with the best warranty available. Color to be chosen after contractor selection. • All shutters, hardware, signage etc. should be removed prior to work, then cleaned and painted prior to reinstallation. • All window glazing should be inspected, any loose, cracked, or dry glazing should be removed and replaced. • Half-round gutters with round downspouts are to be installed the perimeter of the building. Downspouts should deflect water away from foundation into landscape bedding. Color to be chosen after contractor selection. Interior Work • Remove wallpaper in two offices, make needed repairs, then paint including trim. • Repaint 3 offices including trim and make any needed repairs. • Remove 21 interior storm windows, prep/repair and paint all 21 broken light window frames and trim antique white. • Convert existing residential kitchen into office space by removing existing cabinets and appliances. (Paint and window repair is included in 3 offices and 21 windows above) • Build one (1) kitchenette in existing conference room. Base cabinets and wall cabinets should be so minimal disturbance is expressed on the walls. Kitchenette will be corner style and approximately 12’ (feet) total in length. Should include small handwash sink, base cabinets for storage, upper cabinets for storage and solid surface countertop. Outlets should be installed to accommodate one (1) toaster oven, one (1) microwave, one (1) coffee machine and (1) one small fridge/ice maker.
