Specifications include, but are not limited to: A. Contractor shall thoroughly clean and remove grass from cracks. B. Pavement Seal Coating- The contractor shall provide all material, equipment, labor, and transportation necessary for the seal coating of the existing paving surfaces including sealing of all cracks and crevices as required and specified herein, on as needed basis. This work will consist of: 1. Seal Coating the existing pavement with two (2) coats, 2. Sealing all pavement cracks ¼’ wide or wider C. Line Striping: Line Striping Paint- Paint shall be GDOT and VOC approved, Set Fast Quick Dry Latex Traffic Paint that complies with current Federal Specifications and Requirements: TT-P-1952b (non-lead) latex type, or equivalent. Paint shall not cause asphaltic concrete surface to crack or bleed. Colors to be used are white, yellow, and blue. The standard parking space size shall be 9’ x 18’, unless otherwise directed or reserved for handicapped space. All handicapped parking areas shall comply with ADA and be 9’ x 18’ minimum with an additional, adjacent access aisle of 5’ x 18’ minimum. D. Other Striping/Painting- The contractor shall use lead free paint or striping material to also include the following: • Phrase lettering at a height no less than 2’. • Directional arrows at a size of no less than 3’ from arrow base to point. • ADA approved handicap symbols at a size no less than 3’, the preferred is 6’, from bottom to top of symbol...
