Specifications include, but are not limited to: Awarded Vendor will provide all decals, graphics and installation for six (6) Ford KA8 Interceptor utility vehicles. Decals, graphics and installation will match JPD’s current fleet vehicles. Installation of decals and graphics must be provided in Juneau, Alaska. Vendor will create, provide and install graphics and decals that conform to the following: 1. Left and Right Side Print/Cut Graphics: 3M Reflective Graphic Film IJ 780MC-10CR. HP 700 Latex Ink. Top laminated with 3M8519 Luster Overlaminate. JPD will provide print ready files. 2. Vehicle Numbers (front/sides): 3M Reflective Graphic Film IJ 780MC-10CR. HP 700 Latex Ink. Top laminated with 3M8519 Luster Overlaminate. Vehicle numbers will be three (3) digits determined by JPD and installed on specific vehicles identified by license plate number. Vehicle numbers will be installed on the lower left and lower right sides of the vehicles front corner panels, below the headlights, just before the front wheel. Emblem lettering will be a solid blue color to match other solid blue lettering on the vehicle. Emblem lettering will be 3.5” in height and 8” total in length. 3. Vehicle Numbers (rear of vehicle): 3M Reflective Graphic Film IJ 780MC-10CR. HP 700 Latex Ink. Top laminated with 3M8519 Luster Overlaminate. Vehicle numbers will be three (3) digits determined by JPD and installed on specific vehicles identified by license plate number. Vehicle numbers will be installed on the rear of the vehicle, to the right of the Ford manufacturer emblem below the rear window and centered within the space. Emblem lettering will be a solid blue color to match other solid blue lettering on the vehicle. Emblem lettering will be 3” in height and 8” total in length.
