Specifications include, but are not limited to: 3.1.1 The County is responsible for providing and holding work uniforms in inventory for distribution as needed. The largest single use of the uniforms is the combination of both paid and volunteer firefighters throughout the County. The purpose of this requirement is to establish a contract for the furnishing of work uniforms (cut in both male and female patterns) in an effort to maintain the County's inventory at proper stock levels. Fabric: Galey and Lord Industries, Inc. – Indestructible FS 1256 (except pocket, crotch and waistband linings): Fiber: 65% polyester, 35% combed cotton Weave: Twill Finished Weight: 7.8 + 0.25 ounce per square yard Thread Count: Warp: 84, Filling: 42 + l0% Tensile Strength: Warp: 2l0 pounds + l0% Filling: ll0 pounds + l0% Tear Strength: Warp: 9 pounds + l0% Filling: 7 pounds + l0% Color: Midnight Navy Blue Finishing: 1. Soil release treatment 2. Pre-shrinking residual shrinkage shall not exceed 2% when tested in accordance with Federal Test Methods Standard #l9l, Method #5522 3. Wrinkle recovery - when tested in compliance with Federal Test Method Standard #l9l, Method #52l4, appearance shall be equal to or better than the D.P. 3.5 replica. Lining Fabric: Pockets, crotch and waistband Thread Count: Not less than 148 total yarns per inch in warp and filling directions with a minimum of 65 yarns per inch in either direction
