XX111A – Blitzfire Monitor: • 2.5” (65mm) Female Swivel Rocker Inlet • 2.5” (65mm) Rigid Male Outlet • Horizontal Movement: 20-degrees left and right of center • Vertical Movement: 10 to 46-degrees above horizontal • Turbulence-free slide valve • Safety Shut-Off Valve MD12A – Max-Force Nozzle: • 100/55 PSI (7/4bar) Dual-Pressure Nozzle • Flow Capacity: 100-500 GPM (400-2000 LPM) • Stream: Straight stream to 120-degree wide fog XX-B – Storage Bracket W/ NOZZLE STRAP This stainless steel and hard coat aluminum storage bracket can be mounted for rapid deployment of a pre-connected Blitzfire. Mount on any accessible vertical or horizontal surface. Comes complete with mounting screws. 20″L x 8.5″W x 2″H (50.8 x 21.6 x 5.1cm) PRO/PAK 1.5”F ANGLED COUPLING SKU: UM12-NF Category: Portable Foam Systems 12 GPM @ 100 PSI ENGLISH TEXT TFT’s PRO/pak foam injection and application system is the ideal choice with any Class A, AFFF or Alcohol Resistant foam concentrate. Everything you need is contained in one package that attaches to the end of your 25 or 38 mm (1 or 1½”) fire hose. The PRO/pak has a high impact 9.5 l (2.5 gal.) foam reservoir with a built-in eductor that can be set to the ratio of foam or wetting agents being used. A large, easy-open fill port has an indicator to show the type of liquid in the tank. Flow is controlled by a twist grip valve that also functions as a carrying handle. With three different quick connect nozzles included, the PRO/pak system is capable of producing low or medium expansion finished foam, while operating at low inlet pressures.
