Specifications include, but are not limited to: Fully equipped Floating Dredge and Systems to include the following components and specifications: • Upper boundary 1500 GPM at 148 feet of total head • Lower boundary 2500 GPM at 86 feet of total head • Cutting Depth Range: 1 foot to 19.5 foot below water surface • Pass Requirement (Single): 7.5 foot wide by 16 inches depth maximum • Must be tested and approved in accordance with any applicable rules and regulations, including Hydraulic Institute Standards • Operating platform constructed with non-skid steel decking • Aluminum handrails • Reinforced steel dredge boom • Electric system: 12V, 93.5 amp-hour, CCA 925 amps battery, capable of providing power for all primary and auxiliary functions • Fuel system: 10-hour operational capacity, 140-gallon onboard storage tank capacity • Operator Cab o Detachable, constructed of steel o Dual steel, bifold, locking entry door with fixed window on each section o Sloped, tinted, ANSI Z26.1 safety standard compliant, windshield with protective casing o Electric, two speed windshield wipers o Fully insulated o Dome light o Dual fan, climate control, with defroster o Battery disconnect capability • Operator station o Appropriate space and safety design to include non-skid surfaces o Padded, adjustable captain’s chair o Adjustable steering wheel or joystick control o Power plug access point o Control panel Outboard traverse hydraulic motor control Cable traverse hydraulic motor control Pump hydraulic motor control Auger/ cutterhead depth control Auger hydraulic motor control Cutterhead tilt control.
