Specifications include, but are not limited to: Two times per service requirements (twice weekly): 1. Empty and wipe clean all wastebaskets. QUALITY CONTROL STANDARD: Free of stains and stained litter. 2. Sweep and/or dust mop and damp mop all non-carpeted floor surfaces. QUALITY CONTROL STANDARD: Corners shall be dirt, cobweb, and lint free. Door jams and baseboards free of dirt and mop stain build-up. All debris, paper, lint, dust, and dirt removed. 3. Vacuum clean all carpeted areas. QUALITY CONTROL STANDARD: All debris, paper, lint balls, dirt, and gum removed from carpet including in and around furniture edges (desks, tables, and chairs), and equipment. 4. Wipe clean front entrance door glass, interior and exterior, and window panels, immediately adjacent to entrance doors. Frame and ledges wiped clean. Remove any tape from windows once a week. QUALITY CONTROL STANDARD: Glass should be clean and free of water spots, streaks, and dust. 5. Broom or power sweep immediate entrance exterior areas in front of doorways. QUALITY CONTROL STANDARD: Should be free of lint, paper, debris, and stains. 6. Restrooms: Sweep and wet-mop restroom floors with cleaner and disinfectant rinse. QUALITY CONTROL STANDARD: Free of dirt (especially in corners), stains, paper, cobwebs, water, mop stains and debris. Baseboards and panel bases clean of dirt build-up and stains. Drains free of debris and hair. 7. Toilets/Urinals: Wash, clean, sanitize, and disinfect all toilets, urinals and toilet seats. QUALITY CONTROL STANDARD: Toilets and urinals free of water build-up and stains, dust, dirt and spots. Flush valves clean and polished. Toilet seats up for use, free of spots and stains.
