Specifications include, but are not limited to: Electromechanical Universal Test System 2 each • System Requirements: • Must be capable of low- to medium-force monotonic testing on specimens ranging from thin film plastics to composites and alloys in tension, compression, and flexure testing. • High-speed low-vibration electromechanical drives • Test area enclosure with latched and hinged door • Load Cell for load measurement in tension or compression, overload protection • High resolution digital controller for high speed, closed loop control and data acquisition • Low Profile Force Accuracy: Bending Beam: ± 0.5% of applied force Shear Beam: ± 1.0% of applied force • Low Profile Force Range: Bending Beam: 1 to 100% of rated force capacity Shear Beam: 0.5 to 1% of force rated capacity • S-Beam Force Accuracy: ± 1.0% of applied force • S-Beam Force Range: 1 to 100% of rated force capacity • Rated Force Capacity at Max Test Speed: 100% • Maximum Test Speed at Rated Force Capacity: 100% • Speed Accuracy: Set speed < 0.01mm/min: speed accuracy is within ± 1.0% of set speed Set speed = 0.01mm/min: speed accuracy is within ± 0.5% of set speed • User Digital Inputs/Outputs (DIO): 4 user Digital Inputs and 4 user Digital Outputs
