Specifications include, but are not limited to: Truck: 2024 or 2025 FTR, MT1 152"WB, 127"CA, 25,950 GVWR. White, standard model specifications with power windows, power door locks, air conditioning, 5.57 final ratio, 11R22.5G tires, 23,000 air suspension, steel wheel type, and 50 gallon aluminum fuel tank. Box: Summit Body Size 16L x 102W x 96H OA Length: 16.5 Feet OA Width: 102 Inches Inside Ht: 96 Inches Floor: 3" steel high-tensile I-beam cross-members treated to resist rust. Laminated 1-1/8" hardwood deck undercoated and sealed to preserve hardwood and provide a lustrous appearance. Side Walls: High-tensile aluminum sheet and Z-post 16" on center. Pre-painted white aluminum sheets are sealed at each lap with a double sided adhesive tape to prevent water penetration. Front: Stainless steel front corner 5" radius sheets are polished to a #8 mirror finish, providing a lasting corrosion free appearance. Aerodynamically designed front fiberglass nose cap is re-enforced to provide a durable and watertight connection. Rear: All stainless steel rear frame is designed to preserve an attractive appearance without costly maintenance. Flush rear entry with 3/8" drain trough. Composite rollup rear door with premium seal package. Roof: Translucent fiberglass roof supported by galvanized anti-snag roof bows 24" on center. Perimeter of roof sheet is re-enforced with an extruded aluminum cap, assuring a watertight connection while protecting roof edge from incidental damages. Lining: Full length composite slats, 5-1/2" wide each side (6 rows on bodies longer than 18'). Front wall is lined with 3/8" plywood. Lights: LED lights with a sealed wiring harness. One LED dome light centered in van and switched from interior curbside wall. Bumper: Step Bumper on vans 18' or less; ICC underride protection bumper with conspicuity tape installation on 20' and longer vans. Mounting: Mounted to chassis of correct size and specifications. Lift Gate: Palfinger PLR-33 (3300lbs) 60" x 80" Steel Platform
