The subject vessels hull plating below the waterline found with wholesale pitting and corrosion. The general scope of repairs is to re-plate four sections of the hull below the water as described below. Weld repair or re-plate areas on the deck at hardware installation as described below. Replate area on the port hull at the location of the transducer. Weld repair specific areas labeled on the hull bottom. All other areas of the hull plating below the waterline both port and starboard hulls not being re-plated, the pitting is to be filled and faired with a marine grade proxy style filler compound as specified below. Upon completion of the filling and fairing of the filler compound, the hull areas below the water line are to be prepared for over coating with an epoxy barrier coat and then application of anti-fouling paint. Currently the hull bottoms have been sandblasted down to bare metal.
