Specifications include, but are not limited to: 1. Market St. at Hinesburg Rd.: Contractor shall remove existing 6x6x6 tee and gate valves and install a new 6x6x6 tee and three-valve assembly. Market St water line may require a 6”x8” reducer. The Department shall furnish gate valves, tee, Foster adapters, PVC C900 pipe, retainer glands, Hymax couplings, valve boxes with lids and assist in cutting the AC pipe. The Contractor shall provide crushed stone bedding, precast concrete thrust block and suitable backfill materials. The Contractor shall restore the site to match existing conditions including curbing, concrete sidewalk, and Type II bituminous pavement repair (up to 6” thick), etc. in accordance with the VT AOT R.O.W. permit conditions. 2. Barrett St. at Hinesburg Rd.: Contractor shall remove existing 6x6x6 tee and gate valves and install a new 6x6x6 tee and three-valve assembly. Department shall furnish gate valves, tee, Foster adapters, PVC C900 pipe, retainer glands, Hymax couplings, valve boxes with lids and assist in cutting the AC pipe. The Contractor shall provide crushed stone bedding, precast concrete thrust block and suitable backfill materials. The Contractor shall restore the site to match existing conditions including curbing, concrete sidewalk, and Type II bituminous pavement repair (up to 6” thick), etc. in accordance with VT AOT R.O.W. permit conditions. 3. Iby St. at Hinesburg Rd.: Contractor shall remove existing 6x6x6 tee and gate valves and install a new 6x6x6 tee and three-valve assembly. Department shall furnish gate valves, tee, Foster adapters, PVC C900 pipe, retainer glands, Hymax couplings, valve boxes with lids and assist in cutting the AC pipe. The Contractor shall provide crushed stone bedding, precast concrete thrust block and suitable backfill materials. The Contractor shall restore the site to match existing conditions including curbing, concrete sidewalk, and Type II bituminous pavement repair (up to 6” thick), etc. in accordance with VT AOT permit conditions. 4. Sunset Ave. at Hinesburg Rd.: Contractor shall remove existing 6” gate valve and replace with new 6” gate valve. The Department shall furnish gate valve, Foster adapters, PVC C900 pipe, retainer glands, Hymax couplings, valve boxes with lids and assist in cutting the AC pipe. The Contractor shall provide crushed stone bedding, and suitable backfill materials. The Contractor shall restore the site to match existing conditions including curbing, concrete sidewalk, and Type II bituminous pavement repair (up to 6” thick), etc. in accordance with VT AOT permit conditions. 5. Simpson Ct. at Hinesburg Rd.: Contractor shall remove existing 6x6x6 tee and gate valves and install a new 6x6x6 tee and three-valve assembly. The Department shall furnish gate valves, tee, Foster adapters, PVC C900 pipe, retainer glands, Hymax couplings, valve boxes with lids, and assist in cutting the AC pipe. The Contractor shall provide crushed stone bedding, precast concrete thrust block and suitable backfill materials. The Contractor shall restore the site to match existing conditions including curbing, concrete sidewalk, and Type II bituminous pavement repair (up to 6” thick), etc. in accordance with VT AOT permit conditions.
