Provide labor, equipment, and all costs to replace 1A Coal Belt at the Johns Twitty Energy Center (Turn Key). The coal belt is 4-ply 600 PIW, the old belt is approximately 60” wide and 1,015 feet long and has 3/16 inch x 3/32 inch MSHA fire resistant covers meeting MSHA standard for flame retardant , is one continuous length with no factory splices, was not split from a wider belt , and will be used for Powder River Basin (PRB) coal. The splice to be used will be a hot vulcanized splice and not mechanical (Finger Splice Preferred). The new belt is approximately 1,100 feet long. The successful bidder will be responsible for moving the new belt from the JTEC 1 crane bay to the conveyor. City Utilities can load the belt onto a trailer for moving. The successful bidder will also be responsible for rolling up the old belt, leaving approximately 50 feet, and removing the remainder from City Utilities of Springfield property. Belt installation will be scheduled between deliveries of coal trains and the timing of the belt installation is critical. The plant will be in operation during installation and delays could limit plant output.
