Resurfacing Pool Water Features Project SCOPE OF WORK: Pool Slide - High pressure wash, using biodegradable degreasing agent, to remove all dirt, oil, grease, loose paint and oxidation, along with hand scraping, sanding, and wire brushing as needed. Prepare all joints and crevices for proper adhesion of caulk. Handle minor repairs to fiberglass structure as needed prior to applying new gel coat. Caulk slide joints Sikaflex Adhesion Pre-Prime and Sika Flex 291 Urethane Adhesive/Seal. Resurface interior slide using premium gelcoat to 20-25 mils DFT (dry film thickness). Pool Slide Structure - High pressure wash, using biodegradable degreasing agent, to remove all dirt, oil, grease, loose paint and oxidation, along with hand scraping, sanding, and wire brushing as needed. Spot prime all necessary areas including bare steel, corroded areas, rigging scrapes, burnishes and welds, including fasteners with one coat of a macropoxy 646 epoxy primer. Finish paint on all structural steel with a sherloxane 800 polysiloxane topcoat...
