To procure boat registration decals for NH Dept. of Safety. The decals shall be produced in the form of pairs of 2-7/8” x 3” decals with matching serial numbers, side-by-side on a single liner. The decals are intended for placement on both sides of a boat hull, to signify proper registration of the boat by its owner. QUANTITY: 1) 120,000 printed decal sheets. 2) No overrun and underrun may not exceed five tenths of one percent (0.5%). 3) Please also quote price per M, minimum quantity and lead time for additional decals re-ordered within 11-months’ time. FORMAT: 1) The size of a decal sheet will be 6” x 3”. The face stock of the sheet will be divided by two kiss cuts into two 2-7/8” x 3” stickers, plus a 1/4” staple tab on one of the side edges. The liner shall remain single and undivided so that the decal application instructions printed on it will stay whole and readable. 2) The decal face stock shall be printed in PMS 072 BLUE, numbered in two locations with a boat registration serial number in black ink, and coated with a clear protective coating overall. 3) The decal liner shall be printed in black. Ink coverage is light with no bleeds. DECAL STOCK: 1) All decals shall be made of 3M Scotchlite 5470 ER (WHITE) Validation Security Sheeting with Ensure Image, or Adcolite 6000 Security Grade, or an approved equal. This is a weather resistant, retro-reflective decal sheeting, incorporating a counterfeit-resistant security legend.
