The following standards shall be used in inspecting custodial services: i. Plumbing Fixtures and Dispenser Cleaning - Plumbing fixtures and dispensers are clean when free of all deposits and stains so that item is left without dust streaks, film, odor, or stains. ii. Dusting - A properly dusted surface is free of all dirt and dust, dust streaks, lint and cobwebs. iii. Sweeping - A properly swept floor is free of all dirt, dust, grit, lint, and debris except imbedded dirt or grit. iv. Spot Cleaning - A surface adequately spot cleaned is free of all stains, deposits, and is substantially free of cleaning marks. v. Damp Mopping - A satisfactorily damp mopped floor is without dirt and dust, marks, film, streaks, debris, and standing water. vi. Metal Cleaning - When cleaned, all surfaces are without deposits or tarnish, and with a uniformly bright appearance. Cleaner is removed from adjacent surfaces. vii. Glass Cleaning - Glass is clean when all accessible glass surfaces are without streaks, film, deposits, and stains and has a uniformly bright appearance and adjacent surfaces have been wiped clean. Extreme care and correct materials must be used to avoid damage and scratching on all surfaces. viii. Finish Removal - Finish removal is accomplished when surfaces have all finish dirt removed down to the floor material, floor is left free of all dirt, stains, deposits, debris, cleaning solution, and standing water, and the floor has a uniform appearance when dry. Plain water rinse and pickup must follow removal operation immediately.
