The objective of this request for proposals is to secure a contract with a company to remount two (2) Braun Express modules onto 2025 or newer Ford F-450 chassis for use as ambulances by the White County Emergency Medical Service (EMS) in Sparta, Tennessee. 1. Base Chassis A 2025 or newer Ford F-450 model chassis shall be provided with the following options: a) Regular cab style b) 6.7 L diesel engine c) 4x2 drivetrain d) Cab-to-axel of 84” e) Ambulance prep package 2. Chassis Modifications a) Install LiquidSpring rear suspension system, with lowering capability activated via left-hand rear door. b) Install new running boards c) Install stainless steel wheel simulators 3. Dismount and Inspection The existing module should be removed with care by disconnecting all electrical, mechanical, and medical systems between chassis and module. A full inspection of the entire module must occur. The below list of components which require inspection should not be considered all encompassing. Professional judgement should be used to inspect other components as necessary. a) The module’s exposed welds, tie down braces, structural framing, and gussets shall be inspected for excessive ware, cracks, warping, or corrosion. Issues found during this inspection should be repaired. b) All door hinges, latches, and pins should be inspected for proper operation. Damaged or worn parts should be replaced or repaired. c) All module exterior compartment and entry door switches should be inspected for proper operation. Defective or damaged components should be replaced or repaired. 4. Module Exterior a) Inspect for and repair any minor body damage prior to painting. b) Completely repaint module using a single stage urethane PPG Concept paint system. All doors, trims, lights, and other components must be removed prior to painting. c) Restripe, letter, and apply decals as per existing fleet design and in coordination with White County. 5. Remount Module a) Module should be remounted to new chassis utilizing new body mounts and fasteners to attach the module to the chassis. b) Install new accordion boot between cab and module. c) Install new weather stripping on exterior compartment doors and entry doors d) Install new rear bumper assembly e) Install new rear kickplate f) Install new fenderettes g) Install new stone guards, rub rails, and all other exterior diamond-plated exterior trims. h) Install new automatic retractable step on side entry door
