3.1.1 CNC Plasma Cutting Machine or Equal 3.1.1.1 Must be a Torchmate 4510 with 5’X10’ Torchmate 440 Water Table or equal 3.1.1.2 Must have Flexcut 80 Amp, 1” Pierce Plasma Cutter 3.1.1.3 Table must include height control with magnetic breakaway, Ohmic Sensing, automatic Torch Arc Voltage Height Control, fume extraction, slat supports, computer, CNC controller 3.1.1.4 Must have cutting operating mode selection 3.1.1.5 Must have primary air, gas pressure gauge and regulator knob 3.1.1.6 Must have Torch connection 3.1.1.7 Must have output current knob 3.1.1.8 Must have CNC interface 3.1.1.9 Must have Work ground back 3.1.1.10 Must have Input Cord – 10 foot (3.0 M) 3.1.1.11 Must have power switch 3.1.1.12 Must have Air or gas inlet (1/4-inch NPT quick Connect) 3.1.1.13 The following indicator LED lights are required: 3.1.1.13.1 Cut, grid, gouge indicator 3.1.1.13.2 Power on/off green indicator 3.1.1.13.3 Red output indicator 3.1.1.13.4 Yellow Thermal LED indicator 3.1.1.13.5 Yellow Gas pressure LED indicator 3.1.1.13.6 Parts-In-Place (PIP) yellow LED indicator 3.1.1.14 Must provide three (3) five 5) gallons of Plateguard water table additive. 3.1.1.15 Must come completely assembled. 3.1.2 Computer Aided Design and Computer Aided Manufacturing Education Software Packages or Equal. 3.1.2.1 Must include Torchmate CAD CAM Educational Package 3.1.2.2 Must include Onboard VMD Nest with DXF & DWG Importer Software 3.1.2.3 Required One year subscription to Torchmate Academy 4000 Series Online Learning Portal.
