- (CU 103024) CLAMP, HOT LINE, BRONZE WITH APPROXIMATE MAIN AND TAP CONDUCTOR RANGE OF #8 SOLID TO #2/0 STANDARD COPPER. - (CU 145511) THIMBLE CLEVIS 35K. * THIMBLE CLEVIS, 35,000 LB. MINIMUM ULTIMATE STRENGTH. * THE CLEVIS TO BE SUITABLE FOR USE WITH PREFORMED GUY GRIPS AND TO HAVE A 3/4" STEEL PIN WITH COTTER PIN. * THE CLEVIS SHALL HAVE A MINIMUM WIDTH OF 7/8" SO AS TO BE ABLE TO BE REPLACED IN A 3/4" WIDE VANG OR DEADEND /GUYING TEE. * THE CLEVIS AND PIN SHALL BE HOT DIPPED GALVANIZED STEEL. * THE COTTER PIN SHALL BE STAINLESS STEEL. - (CU 103310) FULL TENSION, TWO PIECE COMPRESSION SLEEVE, TYPE YDS-R, CONSISTING OF ALUMINUM OUTER SLEEVE AND STEEL INNER SLEEVE FOR 397.5 MCM 26/7 ACSR CONDUCTOR. FILLER HOLES PROVIDED FOR INHIBITOR JOINT COMPOUND AND SUPPLIED WITH PLUGS. SLEEVES TO BE INSTALLED WITH BURNDY Y45 HYDRAULIC PRESS USING BURNDY DIE SETS U 253 AND U317. NOTE: OTHER BRANDS ARE NOT ACCEPTABLE UNLESS THE ABOVE SPECIFIED TOOL AND DIES CAN BE USED TO ACHIEVE 100% OF RATED BREAKING STRENGTH OF CONDUCTOR.
