1. Clean, sealcoat, and re-stripe all asphalt driveways and parking areas to industry standards. 2. Clean area to be sealcoated with high power blowers and steel brooms where necessary. The contractor will be responsible for cleaning cracks 3/8” or wider of dirt, debris and vegetation to insure bonding of crack sealing material. Seal these cracks with Craftco Roadsaver PLS or equivalent* hot pourable sealant. 3. Scrub and treat oil spots with oil spot primer to aid the adhesion of sealer to these areas. 4. Apply 2 coats of sand mixed Mac 52 by squeegee at the rate of 0.15 gallon per square yard. Allow sufficient drying time between coats. 5. Other equivalent* pavement sealers will be considered but only as an Alternate. Mac 52 must be the Base Bid. 6. Re-stripe to current lot design unless otherwise specified using safety yellow and handicap blue. Re-paint any painted curb or sidewalk edge with safety yellow or handicap blue on pedestrian ramps. The striping should be done within 48 hours of sealcoating (weather permitting). 7. Coordinate all scheduling with Library’s Manager of Building Systems. 8. The successful bidder shall be responsible for not disrupting library staff and patrons. All work shall be performed outside of normal Library operating hours. The Library will make arrangements to have parking lot lighting turned on if necessary. 9. Any subcontracting must be clearly noted in the response to the IFB. All insurance and certifications required of the bidder are also required of any subcontractor. 10. Project (all branches) must be completed by November 1, 2024. 11. For reference, a sample three-year contract is included as Exhibit A. This is the form the successful bidder will be asked to execute.
