1 Three (3) 18’ Water distribution trailers. CargoMate CM818TA2 or equivalent with water distribution plumbing installed. Exterior color shall be White. Bidder must provide drawing of trailer body and plumbing with dimensions. 2 All equipment furnished shall be manufacturer’s current year and latest model in production and shall conform to the best practices known to the automotive and plumbing trade in strength/quality of materials and workmanship, and shall be subject to these specifications in full. SUB shall have a pre-paint inspection at manufacturer location within 170 miles of Springfield, Oregon – or – manufacturer shall provide round-trip transportation from Springfield, Oregon with accommodations for three (3) SUB personnel to attend pre-paint inspection at the manufacturer location. B. TRAILER 1 Shall be 7,000 lb., capacity tandem axle with a two (2) inch block lift. 2 Interior dimensions to be 18’ L x 7-1/2’W x 9-1/2’ H. 3 Exterior dimensions shall include a 60” extended tongue. Must have flat front. 4 5,000 lb., tongue jack. 5 3” pintle eye with adjustable coupler. 6 Two (2) corner post drop down jacks at rear corners with sand pads. 7 Ramp rear door with spring assist and 12” door flap. 8 Ramp door and floor shall be aluminum tread plate. 9 Floor and 6” up the walls and ramp floor shall have waterproof slip-resistant sealant or other coating. 10 Insulated ceiling with white aluminum paneling. White aluminum wall liner...
