Boat: Commercial use aluminum, all-welded, reverse chine 8-degree V-Hull Jon boat. Boat should have squared bow and rear split-bench dry storage seat. (Picture #1) # Transom and bottom hull thickness: 0.190 inch aluminum. # Side hull thickness: 0.190 inch aluminum. # Floor and bow work deck 0.188 inch aluminum diamond-tread plate. # Boat to be painted Olive Drab Rf-n8444 green (Picture #25); Dimensions: # 18 ft. in length # 24-inch side height (measured on slant from floor to top of tube rail). # Transom height of 25 inches (24 & 5/8 inch) # Beam width of 93 inches # Bottom width of 72 inches # Longitudinal ribbing, no upright ribs; Boat Requirements: # Bottom hull shall be a reverse chine, gull wing design. An 8-degree, V-hull that rides like a flat bottom boat. # Slightly raised bow with level wash deck (Picture #4). Excessive upward tilt of the bow will be unacceptable. Wash deck should not have any upward tilt and must be as level as possible when boat is on the water...
