- (CU 101550) COPPERWELD NO. 2 SOFT DRAWN WIRE FOR USE AS TRANSMISSION POLE GROUND. MANUFACTURED TO LATEST REVISIONS OF ASTM SPECIFICATIONS B-227. TO BE FURNISHED ON REEL OF APPROXIMATELY 370 LBS (2000 FT) MINIMUM Conversion: 5.45 ft. per lb.; - (CU 102161) 7 FT ALLEY ARM BRACES. 1-3/4" X 3/16" WITH 11/16" HOLE.; PEDESTAL, FOR SIDEWALK/DRIVEWAY INSTALLATIONS PROVIDED WITH A LID. NOMINAL INSIDE DIMENSIONS SHALL BE 24 INCHES WIDE X 24 INCHES LONG X 24 INCHES DEEP. LID BOLTS ARE TO BE PENTA HEADED. ENCLOSURE TO BE INSTALLED ESSENTIALLY FLUSH WITH GRADE AND SHALL BE DESIGNED FOR DRIVEWAY, PARKING LOT, AND OFF-ROADWAY APPLICATIONS SUBJECT TO OCCASIONAL NON-DELIBERATE VEHICULAR TRAFFIC, PER ANSI/SCTE 77 STANDARDS DATED 2007, BOX AND COVER RATED AS TIER 22 . ENCLOSURE TO IDENTIFIED AS "ELECTRIC". ENCLOSURE TO BE OF FIBERGLASS REINFORCED POLYMER CONCRETE MATERIAL.; WIRE, 10 AWG SWITCHBOARD WIRE, NATIONAL ELECTRICAL CODE TYPE "SIS", 600 VOLT, APPROXIMATELY 104 STRAND, TINNED COPPER CONDUCTOR, GRAY COLOR, INSULATION TYPE XHHW-2, ALSO RATED TYPE RW90 GASOLINE & OIL RESISTANT, SURFACE PRINTING STATING MANUFACTURER, TYPE OF CABLE, AND CONDUCTOR SIZE. MEET UL TYPE SIS FLAME RESISTANCE VW-1 RATING. WIRE TO BE FURNISHED ON A NON-RETURNABLE REEL IN A CONTINUOUS LENGTH OF 1000 FEET. EACH REEL TO BE TAGGED WITH TOTAL FOOTAGE; GROSS, TARE AND NET WEIGHT; TYPE OF CONDUCTOR; AND MANUFACTURER.; TAP, #2-250 COPPER CONDUCTOR, COMPRESSION CROSS C TAP Irreversible compression ground tap that connects to perpendicular conductor. Each end has a C shaped compression connector that uses a Burndy compression die Index "U997". The C-tap shall be able to compress #2-250 copper conductor on both the "A" connector and the "B" connector. The "B" connector shall also be able to connect to a 1/2" or 5/8" ground rod.; CONNECTOR, VISE-TYPE, 2-BOLT, MAX CONDUCTOR SIZE 477, MINIMUM CONDUCTOR SIZE 4/0; SPLICE, COMPRESSION COPPER. COPPER SPLICE + COVER FOR 1/0 COPPER WIRE.
